Bearing 3201 2RS

Ball bearings with rhomboid contact are designed for combined loads. They can withstand radial as well as axial loads and tilting moments in both directions. The load capacity of ball bearings with rhomboid contact increases with a larger contact angle. These low-friction ball bearings with high limiting speed are cost-effective and require minimal maintenance. Chrome steel, processed through heat treatment, provides high and uniform hardness along with good wear resistance.

Specifications:

• Sealing Type: Double seal
• Material: Pressed steel
• Inner/Outer Race Material: Chrome steel (GCr15)
• Inner Diameter (d): 12 mm
• Outer Diameter (D): 32 mm
• Thickness (B): 15.9 mm
• Dynamic Load (Cr): 9.7 kN
• Static Load (Cor): 7.15 kN
• Precision Class: P0 (ABEC-1)
• Noise Level: Z1