Dimafix pen 90ml

Dimafix is tailored for 3D printers with FFF technology and Heated Bed.

• It provides great grip between plastic and glass, so warping is not a problem even in large ABS parts.
• You will be able to print in all kind of thermoplastic materials.
• The adhesion property will be activated when the Heated Bed’s temperature is higher than 50ºC.
• While the bed is hot the adhesive effect will be working even in large prints.
• When the Heated Bed’s temperature goes down (40-50ºC) the adhesion effect disappears and the model will be easily detached.
• It is soluble so it is easy to clean only with water.
• It has a long useful life (more than 100 uses).

The first layers in the printing process will be fixed with Dimafix at the hot Heated Bed in the point where the part will be printing. This action avoids unintended effects or warping. Once the printing process is ending and the Heated Bed’s temperature is under 50ºC the model can be removed without any effort from the bed and no tools, that would damage the part, are required.

Product specifications:

• Recommended for printing on heated beds
• Once printed, the piece will detach automatically
• Dimafix Pen are water soluble
• Strong bond during printing. Suitable for multiple materials
• Each bottle allows more than 100 uses